Cisco Catalyst 4500 Series Command Reference Guide

2-196
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
device-sensor filter-list
device-sensor filter-list
To create a CDP or Link Layer Discovery Protocol (LLPD) filter list that contains a list of
Type-Length-Value (TLV) fields to be included or excluded in the Device Sensor output, use the
device-sensor filter-list command in global configuration mode. To remove the filter list, use the no
form of this command.
device-sensor filter-list cdp | lldp list list-name
no device-sensor filter-list cdp | lldp list list-name
Syntax Description
Defaults Protocol TLV fields filter list is not available.
Command Modes Global configuration
Command History
Usage Guidelines Use the device-sensor filter-list command to configure the name of the protocol filter list and enter into
discovery protocol sensor configuration mode. You can configure the list of TLVs in discovery protocol
sensor configuration mode using the tlv {name tlv-name | number tlv-number} command. Use the name
tlv-name keyword-argument pair to specify the name of the TLV. Enter ? to query the available TLV
names or refer to the following tables.
list Contains a discovery protocol filter list.
list-name Name of the filter list.
Release Modification
IOS XE 3.4.0SG and
IOS 15.1(2)SG)
Command introduced on the Catalyst 4500 Series switch.
Table 2-1 CDP TLV Names
CDP TLV Name Description
Global configuration mode
app Enable application TLV
forward Forward CDP packets to another interface
location Enable location information
Interface configuration mode
app Enable application TLV
location Enable location information
server-location Enable CDP location server on interface

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E