Cisco Catalyst 4500 Series Command Reference Guide

2-446
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro auto processing
show shell triggers Displays detail for all supported user created and built-in triggers.
macro auto execute (built-in
function)
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.
macro auto execute
(remotely-defined trigger)
Maps a trigger to a remotely defined functions.
macro auto execute
(user-defined function)
Maps a trigger to a user-defined function.
macro auto global processing Enables Auto Smartports on a switch.
Command Description

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E