Cisco Catalyst 4500 Series Command Reference Guide

2-241
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
energywise (global configuration)
Defaults The importance is 1.
No keywords are defined.
The power level is 10.
The tcp-port-number is 43440.
The name is the hostname.
No neighbors are assigned.
The role is the model number.
Command Modes Configuration
Command History
Usage Guidelines When you add an entity to a domain, EnergyWise is enabled on the entity and its PoE ports.
Examples This example shows how to enable EnergyWise, assign the entity to a domain, and set the password:
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30
Switch(config)# energywise importance 50
Switch(config)# energywise keywords lab1,devlab
Switch(config)# energywise management 60500
Switch(config)# energywise name Entity01
Switch(config)# energywise neighbor 4500-21 43440
Switch(config)# energywise role role.lobbyaccess
Switch(config)# end
Related Commands
Release Modification
12.2(52)SG This command was introduced on the Catalyst 4500 series switch.
Command Description
show energywise Displays the EnergyWise settings and status.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E