Cisco Catalyst 4500 Series - Page 1024

2-966
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vslp (virtual switch)
Examples The following example shows how to display a summary of LMP information for a specific VSLP
instance.
Router# show vslp 2 lmp summary
LMP summary
Link info: Configured: 2 Operational: 0
Peer Peer Peer Peer Timer(s) running
Port Flag State Flag MAC Swtch Port (Time remaining)
--------------------------------------------------------------------------------
4/1 v link_down - - - -
4/2 v link_down - - - -
Router#
The following example shows how to displays the VSLP instance mappings.
Router# show vslp instances
VSLP instance mappings:
Instance Num Name Switch Num Flag
----------------------------------------------------------------------
2 VSL 2 0x00000001
Router#
The following example shows how to display LMP neighbor information:
Router# show vslp 2 lmp neighbors
LMP neighbors
Peer Group info: # Groups: 0
Router#
The following example shows how to display a summary of LMP information:
Router# show vslp lmp summary
Instance #1:
LMP summary
Link info: Configured: 3 Operational: 1
Peer Peer Peer Peer Timer(s) running
Interface Flag State Flag MAC Switch Interface (Time remaining)
--------------------------------------------------------------------------------
Gi1/3/1 v link_down - - - -
Gi1/5/4 vf operational vf 0013.5fcb.1480 2 Gi1/6/4 T4(240ms) T5(2.22s)
Gi1/5/5 v link_down - - - -
Flags: V - valid f -> B - bidirectional
The following examples shows how to display the LMP Tx and Rx hello timer values:
Router# show vslp lmp timer
Instance #1:
LMP hello timer
Hello Tx (T4) ms Hello Rx (T5*) ms
Interface State Cfg Cur Rem Cfg Cur Rem
-------------------------------------------------------------------------
Gi1/9/1 link_down 1000 - - 500000 - -
Gi1/9/3 link_down 1000 - - 500000 - -
Gi1/9/5 link_down 1000 - - 500000 - -
Router#
The following example shows how to display VSLP packet information:
Router# show vslp packet
VSLP packet counters
Transmitted:
total = 1543
error = 0
err_cksum = 0
eobc = 0