Cisco Catalyst 4500 Series - Page 1025

2-967
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vslp (virtual switch)
ibc = 0
eobc[LMP] = 0
eobc[RRP] = 0
eobc[PING] = 0
Received:
total = 1564
error = 0
err_cksum = 0
eobc = 1564
ibc = 0
total[LMP] = 0
total[RRP] = 0
total[PING] = 0
eobc[LMP] = 1559
eobc[RRP] = 5
eobc[PING] = 0
Router#
The following example shows how to display VSLP packet counter information:
Router# show vslp packet counters
VSLP packet counters
Transmitted:
total = 28738
error = 0
err_cksum = 0
eobc = 28738
eobc[LMP] = 28701
eobc[RRP] = 17
eobc[PING] = 20
ibc = 0
ibc[LMP] = 0
ibc[RRP] = 0
ibc[PING] = 0
Received:
total = 28590
error = 0
err_cksum = 0
eobc = 28590
eobc[LMP] = 28552
eobc[RRP] = 18
eobc[PING] = 20
ibc = 0
ibc[LMP] = 0
ibc[RRP] = 0
ibc[PING] = 0
Router#
The following example shows how to display a summary of RRP information:
Router# show vslp rrp summary
RRP information for Instance 1
-------------------------------
Valid Flags Peer Preferred Reserved
Count Peer Peer
-----------------------------------------------
TRUE V 1 1 1
Switch Peer Switch Status Preempt Priority Role Local Remote
Group Number SID SID
--------------------------------------------------------------------
Local 0 1 UP TRUE 200 ACTIVE 0 0
Remote 1 2 UP FALSE 100 STANDBY 9272 271
Flags: V - valid