Cisco Catalyst 4500 Series Command Reference Guide

2-961
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vlan private-vlan
This example shows how to display information about all currently configured private VLAN types:
Switch# show vlan private-vlan type
Vlan Type
---- -----------------
202 primary
303 community
304 community
305 community
306 community
307 community
308 normal
309 community
440 isolated
Switch#
Table 2-42 describes the fields in the show vlan private-vlan command output.
Related Commands
Table 2-42 show vlan private-vlan Command Output Fields
Field Description
Primary Number of the primary VLAN.
Secondary Number of the secondary VLAN.
Secondary-Type Secondary VLAN type is isolated or community.
Ports Indicates the ports within a VLAN.
Type Type of VLAN; possible values are primary, isolated, community,
nonoperational, or normal.
Command Description
private-vlan Configures private VLANs and the association between a
private VLAN and a secondary VLAN.
private-vlan mapping Creates a mapping between the primary and the secondary
VLANs so that both share the same primary VLAN SVI.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E