Cisco Catalyst 4500 Series Command Reference Guide

2-969
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show vtp
MD5 digest : 0xE6 0xF8 0x3E 0xDD 0xA4 0xF5 0xC2 0x0E
Configuration last modified by 172.20.52.18 at 9-22-99 11:18:20
Local updater ID is 172.20.52.18 on interface Vl1 (lowest numbered VLAN interfac
e found)
Switch#
This example shows how to display only those lines in the show vtp output that contain the word
Summary:
Switch# show vtp counters | include Summary
Summary advertisements received : 1
Summary advertisements transmitted : 32
Trunk Join Transmitted Join Received Summary advts received from
Switch#
Table 2-43 describes the fields in the show vtp command output.
Table 2-43 show vtp Command Output Fields
Field Description
Summary advertisements received Total number of summary advertisements received.
Subset advertisements received Total number of subset advertisements received.
Request advertisements received Total number of request advertisements received.
Summary advertisements transmitted Total number of summary advertisements transmitted.
Subset advertisements transmitted Total number of subset advertisements transmitted.
Request advertisements transmitted Total number of request advertisements transmitted.
Number of config revision errors Number of config revision errors.
Number of config digest errors Number of config revision digest errors.
Number of V1 summary errors Number of V1 summary errors.
Trunk Trunk port participating in VTP pruning.
Join Transmitted Number of VTP-Pruning Joins transmitted.
Join Received Number of VTP-Pruning Joins received.
Summary advts received from
non-pruning-capable device
Number of Summary advertisements received from
nonpruning-capable devices.
Number of existing VLANs Total number of VLANs in the domain.
Configuration Revision VTP revision number used to exchange VLAN information.
Maximum VLANs supported locally Maximum number of VLANs allowed on the device.
Number of existing VLANs Number of existing VLANs.
VTP Operating Mode Indicates whether VTP is enabled or disabled.
VTP Domain Name Name of the VTP domain.
VTP Pruning Mode Indicates whether VTP pruning is enabled or disabled.
VTP V2 Mode Indicates the VTP V2 mode as server, client, or transparent.
VTP Traps Generation Indicates whether VTP trap generation mode is enabled or
disabled.
MD5 digest Checksum values.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E