Cisco Catalyst 4500 Series Command Reference Guide

2-55
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
auto qos srnd4
service-policy input AutoQos-4.0-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
For interfaces with auto qos voip cisco-phone enabled
—Global Level Commands Generated
The global templates defined in A and B (above).
—Interface Level Commands Generated
For Fa/Gig Ports:
Switch(config-if)# no qos trust device cisco-phone
no service-policy input AutoQos-VoIP-Input-Cos-Policy
no service-policy output AutoQos-VoIP-Output-Policy
qos trust device cisco-phone
service-policy input AutoQos-4.0-Cisco-Phone-Input-Policy
service-policy output AutoQos-4.0-Output-Policy
Examples To generate QoS configurations based on solution reference network design 4.0, do the following:
Switch# auto qos srnd4
Related Commands Command Description
auto qos trust Generate QoS configurations for trusted interfaces.
auto qos voip cisco-softphone Generate QoS configuration for interfaces connected to PCs
running the Cisco IP SoftPhone application and marks police
traffic coming from such interfaces.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E