Cisco Catalyst 4500 Series - Page 1163

2-1105
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
username
Command Description
enable password (refer to
Cisco IOS documentation)
Sets a local password to control access to various privilege levels.
enable secret (refer to Cisco
IOS documentation)
Specifies an additional layer of security over the enable password
command.
username (refer to Cisco IOS
documentation)
Establishes a username-based authentication system.