Cisco Catalyst 4500 Series Command Reference Guide

2-1110
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
vlan (VLAN Database mode)
Examples This example shows how to add a new VLAN with all the default parameters to the new VLAN database:
Switch(vlan)# vlan 2
Note If the VLAN already exists, no action occurs.
This example shows how to cause the device to add a new VLAN, specify the media type and parent
VLAN ID number 3, and set all the other parameters to the defaults:
Switch(vlan)# vlan 2 media fastethernet parent 3
VLAN 2 modified:
Media type FASTETHERNET
Parent VLAN 3
This example shows how to delete VLAN 2:
Switch(vlan)# no vlan 2
Switch(vlan)#
This example shows how to return the MTU to the default for its type and the translational bridging
VLANs to the default:
Switch(vlan)# no vlan 2 mtu tb-vlan1 tb-vlan2
Switch(vlan)#
Related Commands Command Description
show vlan Displays VLAN information.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E