Index
IN-3
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
authentication methods, specifying the order of
attempts 2-33
authentication open command 2-32
authentication order command 2-33
authentication periodic command 2-35
authentication port-control command 2-36
authentication priority command 2-38
authentication timer, setting 2-40
authentication timer command 2-40
authentication violation command 2-42
auth fail VLAN
enable on a port 2-209
set max number of attempts 2-208
Auth Manager
configuring
authentication timer 2-40
authorization state
enabling manual control 2-225
authorization state of a controlled port 2-225
automatic installation
displaying status 2-648
automatic medium-dependent interface crossover
See Auto-MDIX
Auto-MDIX
disabling 2-461
enabling 2-461
auto-negotiate interface speed
example 2-1019
auto-QoS
configuring for VoIP 2-64
displaying configuration 2-649
auto qos srnd4 command 2-52
average-packet-size (netflow-lite monitor submode)
command
2-73
B
baby giants
displaying the system MTU setting 2-942
setting the maximum Layer 2 payload size 2-1076
BackboneFast
displaying debugging messages 2-171
displaying spanning tree status 2-926
enabling debugging 2-171
bandwidth command 2-75
bindings
store for DHCP snooping 2-313
BOOT environment variable
displaying information 2-652
bootflash
displaying information 2-650
BPDUs
debugging spanning tree activities 2-169
bridge protocol data units
See BPDUs
broadcast suppression level
configuring 2-1020, 2-1022
enabling 2-1020, 2-1022
C
cable diagnostics
TDR
displaying test results 2-653
testing conditions of copper cables 2-1080
call home
displaying information 2-655
e-mailing output 2-83
entering configuration submode 2-78
executing 2-83
manually send test message 2-86
receiving information 2-81
sending alert group message 2-84
submitting information 2-81
call home destination profiles
displaying 2-657
Catalyst 4507R 2-528
CDP
To Next Page
Loading...
