Cisco Catalyst 4500 Series Command Reference Guide

2-82
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
call-home request
Examples This example shows a request for analysis of a user-specified show command:
Switch# call-home request output-analysis "show diagnostic result module all" profile TG
Related Commands call-home (global configuration) Enters call home configuration mode.
call-home send Sends a CLI command to be executed, with the command output
to be sent by e-mail.
call-home send alert-group Sends a specific alert group message.
service call-home (refer to Cisco
IOS documentation)
Enables or disables Call Home.
show call-home Displays call-home configuration information.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E