Cisco Catalyst 4500 Series - Page 170

2-112
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear ip igmp group
This example shows how to clear the IGMP group cache entries from a specific interface:
Switch# clear ip igmp group gigabitethernet 2/2
Switch#
Related Commands Command Description
ip host (refer to Cisco IOS
documentation)
Defines a static host name-to-address mapping in the host
cache.
show ip igmp groups (refer to Cisco IOS
documentation)
Displays the multicast groups with receivers that are
directly connected to the router and that were learned
through Internet Group Management Protocol (IGMP), use
the show ip igmp groups command in EXEC mode.
show ip igmp interface Displays the information about the IGMP-interface status
and configuration.