Cisco Catalyst 4500 Series - Page 184

2-126
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear port-security
This example shows how to remove all the dynamic secure addresses learned on a specific interface:
Switch# clear port-security dynamic interface gigabitethernet0/1
You can verify that the information was deleted by entering the show port-security command.
Related Commands Command Description
show port-security Displays information about the port-security setting.
switchport port-security Enables port security on an interface.