Cisco Catalyst 4500 Series Command Reference Guide

Contents
iv
Release IOS XE 3.4.0SG and IOS 15.1(2)SG
OL-27596 -01
arp access-list 2-21
attach module 2-22
authentication control-direction 2-23
authentication critical recovery delay 2-25
authentication event 2-26
authentication fallback 2-29
authentication host-mode 2-30
authentication open 2-32
authentication order 2-33
authentication periodic 2-35
authentication port-control 2-36
authentication priority 2-38
authentication timer 2-40
authentication violation 2-42
auto qos classify 2-44
auto qos classify police 2-48
auto qos srnd4 2-52
auto qos trust 2-56
auto qos video 2-60
auto qos voip 2-64
auto qos voip cisco-softphone 2-67
auto-sync 2-72
average-packet-size (netflow-lite monitor submode) 2-73
bandwidth 2-75
call-home (global configuration) 2-78
call-home request 2-81
call-home send 2-83
call-home send alert-group 2-84
call-home test 2-86
channel-group 2-87
channel-protocol 2-89
cisp enable 2-91
class 2-92
class-map 2-95
clear counters 2-97

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E