Cisco Catalyst 4500 Series Command Reference Guide

2-198
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
device-sensor filter-list
Related Commands Command Description
debug device-sensor Enables debugging for Device Sensor.
device-sensor
accounting
Adds the Device Sensor protocol data to accounting records and generates
additional accounting events when new sensor data is detected.
device-sensor filter-list
dhcp
Creates a DHCP filter containing a list of options that can be included or
excluded in the Device Sensor output.
show device-sensor
cache
Displays Device Sensor cache entries.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E