Cisco Catalyst 4500 Series - Page 304

2-246
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
energywise domain
Command Modes Configuration
Command History
Usage Guidelines If you enter the energywise domain domain-name secret [0 | 7] password command, the entity selects
the first available interface to communicate with the network and with management applications.
Examples This example shows how to enable EnergyWise and how to set the domain-name and password values:.
Switch(config)# energywise domain cisco secret cisco protocol udp port 43440 ip 2.2.4.30
This example shows how to enable EnergyWise and to specify the route to the management applications:
Switch(config)# energywise domain cisco secret 0 cisco protocol udp port 43440 ip
192.168.1.2
Related Commands
Release Modification
12.2(52)SG This command was introduced.
Command Description
show energywise Displays the EnergyWise settings and status.