Cisco Catalyst 4500 Series Command Reference Guide

2-254
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
erase
Related Commands Command Description
boot config (refer to Cisco IOS
documentation)
Specifies the device and filename of the configuration file.
delete (refer to Cisco IOS
documentation)
Deletes a file from a flash memory device or NVRAM.
show bootvar Displays BOOT environment variable information.
undelete (refer to Cisco IOS
documentation)
Recovers a file marked “deleted” on a Class a flash file
system.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E