Cisco Catalyst 4500 Series Command Reference Guide

2-266
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
flowcontrol
This example shows how to set receive flow control to desired:
Switch(config-if)# flowcontrol receive desired
Switch(config-if)#
Related Commands Command Description
interface port-channel Accesses or creates a port-channel interface.
interface range Runs a command on multiple ports at the same time.
show flowcontrol Displays the per-interface status and statistics related to
flow control.
show running-config Displays the running-configuration for a switch.
speed Configures the interface speed.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E