Cisco Catalyst 4500 Series - Page 328

2-270
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
hw-module module start
The following example shows what happens if a module has not been stopped and you enter this
command:
Switch# hw-module module 2 start
% Module 2 not stopped
Related Commands Command Description
hw-module module stop Shuts down a module and makes it safe for removal.