Cisco Catalyst 4500 Series - Page 330

2-272
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
hw-module module stop
The following example shows what happens if a module is already stopped and you enter the hw-module
module stop commandd:
Switch# hw-module module 2 stop
% Module 2 stopped
Related Commands Command Description
hw-module module start Boots a module after if it has been stopped.