Cisco Catalyst 4500 Series - Page 357

2-299
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
ip arp inspection log-buffer
This example shows how to configure the logging rate to 10 logs per 3 seconds:
Switch(config)# ip arp inspection log-buffer logs 10 interval 3
Switch(config)# end
Switch# show ip arp inspection log
Total Log Buffer Size : 45
Syslog rate : 10 entries per 3 seconds.
No entries in log buffer.
Switch#
Related Commands Command Description
arp access-list Defines an ARP access list or adds clauses at the end of a
predefined list.
show ip arp inspection Displays the status of dynamic ARP inspection for a
specific range of VLANs.