Cisco Catalyst 4500 Series Command Reference Guide

2-362
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
ip wccp group-listen
Related Commands Command Description
ip wccp Enables support of the WCCP service for participation in a
service group.
ip wccp check services all Enables all Web Cache Communication Protocol (WCCP)
services.
ip wccp redirect Enables WCCP redirection on an interface.
ip wccp redirect Enables packet redirection on an inbound or outbound interface
using Web Cache Communication Protocol (WCCP).
ip wccp redirect exclude in Configures an interface to exclude packets received on an
interface from being checked for redirection.
ip wccp version Specifies which version of WCCP you wish to use on your
router.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E