Cisco Catalyst 4500 Series Command Reference Guide

2-366
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
p wccp redirect exclude in
ip wccp check services
all
Configures an interface on a router to enable or disable the reception of IP
multicast packets for Web Cache Communication Protocol (WCCP).
ip wccp group-listen Configures an interface on a router to enable or disable the reception of IP
multicast packets for Web Cache Communication Protocol (WCCP).
ip wccp redirect exclude
in
Enables redirection exclusion on an interface.
show ip interface Displays the usability status of interfaces that are configured for IP.
show ip wccp Displays the WCCP global configuration and statistics.
Command Description

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E