Cisco Catalyst 4500 Series Command Reference Guide

2-394
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
l2protocol-tunnel drop-threshold
Command Description
l2protocol-tunnel Enables protocol tunneling on an interface.
l2protocol-tunnel cos Configures the class of service (CoS) value for all tunneled
Layer 2 protocol packets.
l2protocol-tunnel shutdown-threshold Configures the protocol tunneling encapsulation rate.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E