Cisco Catalyst 4500 Series - Page 462

2-404
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
logging event link-status (interface configuration)
This example shows how to enable the global event link-status setting on interface gi11/1:
Switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# interface gi11/1
Switch(config-if)# logging event link-status use-global
Switch(config-if)# end
Switch#
Related Commands Command Description
logging event link-status global (global
configuration)
Changes the default switch-wide global link-status event
messaging settings.