Cisco Catalyst 4500 Series - Page 485

2-427
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro apply cisco-phone
switchport port-security aging type inactivity
# Enable auto-qos to extend trust to attached Cisco phone
auto qos voip cisco-phone
# Configure port as an edge network port
spanning-tree portfast
spanning-tree bpduguard enable@
Related Commands Command Description
macro apply cisco-desktop Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to a standard
desktop.
macro apply cisco-router Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to a router.
macro apply cisco-switch Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to another switch.