Cisco Catalyst 4500 Series Command Reference Guide

2-429
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro apply cisco-router
# Ensure fast access to the network when enabling the interface.
# Ensure that switch devices cannot become active on the interface.
spanning-tree portfast
spanning-tree bpduguard enable
Related Commands Command Description
macro apply cisco-desktop Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to a standard
desktop.
macro apply cisco-phone Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to a standard
desktop and a Cisco IP phone.
macro apply cisco-router Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to a router.
macro apply cisco-switch Enables the Cisco-recommended features and settings that
are suitable for connecting a switch port to another switch.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E