Cisco Catalyst 4500 Series - Page 491

2-433
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro auto device
macro auto execute
(user-defined function)
Maps a trigger to a user-defined function.
macro auto global processing Enables Auto Smartports on a switch.
macro auto processing Enables Auto SmartPorts macros on a specific interface.
macro auto sticky Specifies not to remove configurations applied by ASP across link
flaps and device removal.
shell trigger Creates a user defined trigger.
Command Description