Cisco Catalyst 4500 Series Command Reference Guide

2-492
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
netflow-lite sampler
Switch# show netflow-lite sampler sampler1
Netflow-lite Sampler sampler1:
Id : 1
Packet Sampling rate: 1 out of 32
Packet Section Size: 64 bytes
Packet offset: 16 bytes
You can verify your settings with the show netflow-lite exporter privileged EXEC command.
Related Commands Command Description
packet-offset (netflow-lite
sampler submode)
Specifies a starting packet offset in netflow-lite submode.
packet-rate (netflow-lite
sampler submode)
Specifies a packet sampling rate in netflow-lite sampler submode.
packet-section size (netflow-lite
sampler submode)
Specifies a sampled header size in netflow-lite submode.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E