Cisco Catalyst 4500 Series - Page 615

2-557
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-agent format-type (global)
Use the generic-error-message command to set an error message notifying the sender that the
PPPoE Discovery packet was too large.
Examples This example shows how to set an access-node-identifier:
Switch(config)# pppoe intermediate-agent format-type access-node-identifier string
switch-abc-123
This example shows how to unset a generic-error-message:
Switch(config)# no pppoe intermediate-agent format-type generic-error-message
Related Commands Command Description
show pppoe
intermediate-agent interface
Displays the PPPoE Intermediate Agent configuration and
statistics (packet counters).