2-615
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
service-policy (policy-map class)
Related Commands Command Description
bandwidth Creates a signaling class structure that can be referred to by its
name.
class Specifies the name of the class whose traffic policy you want to
create or change.
dbl Enables active queue management on a transmit queue used by a
class of traffic.
policy-map Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
priority Enables the strict priority queue (low-latency queueing [LLQ])
and to give priority to a class of traffic belonging to a policy map
attached to a physical port.
random-detect (refer to Cisco
IOS documentation)
Enables Weighted Random Early Detection (WRED) or
distributed WRED (DWRED).
shape (class-based queueing) Enables traffic shaping a class of traffic in a policy map attached
to a physical port.
show policy-map Displays information about the policy map.
To Next Page
Loading...
