Cisco Catalyst 4500 Series - Page 675

2-617
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
service-policy input (control-plane)
Switch(config)# control-plane
Switch(config-cp)# service-policy input control-plane-policy
Switch(config-cp)# exit
Related Commands Command Description
control-plane Enters control-plane configuration mode.
macro global apply
system-cpp
Applies the control plane policing default template to the switch.
policy-map Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
show policy-map
control-plane
Displays the configuration either of a class or of all classes for the
policy map of a control plane.