Cisco Catalyst 4500 Series Command Reference Guide

2-11
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
access-list hardware entries
Output Acl(PortAndVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Acl(PortOrVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Qos(PortAndVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Qos(PortOrVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
L4Ops: used 2 out of 64
Switch#
This example shows how to reserve space (scatter) between ACL entries in the hardware. The
number of masks required to program 49 percent of the entries has decreased to 49 percent.
Switch# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# access-list hardware entries scattered
Switch(config)# end
Switch#
01:39:37: %SYS-5-CONFIG_I: Configured from console by console
Switch#
Switch# show platform hardware acl statistics utilization brief
Entries/Total(%) Masks/Total(%)
----------------- ---------------
Input Acl(PortAndVlan) 2016 / 4096 ( 49) 252 / 512 ( 49)
Input Acl(PortOrVlan) 6 / 4096 ( 0) 5 / 512 ( 0)
Input Qos(PortAndVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Input Qos(PortOrVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Acl(PortAndVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Acl(PortOrVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Qos(PortAndVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
Output Qos(PortOrVlan) 0 / 4096 ( 0) 0 / 512 ( 0)
L4Ops: used 2 out of 64
Switch#

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E