Cisco Catalyst 4500 Series - Page 814

2-756
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip igmp snooping vlan
Related Commands Command Description
ip igmp snooping Enable IGMP snooping.
ip igmp snooping vlan immediate-leave Enable IGMP immediate-leave processing.
ip igmp snooping vlan mrouter Statically configures a Layer 2 interface as a multicast
router interface for a VLAN.
ip igmp snooping vlan static Configures a Layer 2 interface as a member of a group.
show ip igmp interface Displays the information about the IGMP-interface status
and configuration.
show ip igmp snooping mrouter Displays information on the dynamically learned and
manually configured multicast switch interfaces.
show mac-address-table multicast Displays information about the multicast MAC address
table.