2-759
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip interface
Proxy ARP Status of whether Proxy Address Resolution Protocol (ARP) is
enabled for the interface.
Security level IP Security Option (IPSO) security level set for this interface.
Split horizon Status of split horizon.
ICMP redirects Status of the redirect messages on this interface.
ICMP unreachables Status of the unreachable messages on this interface.
ICMP mask replies Status of the mask replies on this interface.
IP fast switching Status of whether fast switching has been enabled for this
interface. Fast switching is typically enabled on serial interfaces,
such as this one.
IP SSE switching Status of the IP silicon switching engine (SSE).
Router Discovery Status of the discovery process for this interface. It is typically
disabled on serial interfaces.
IP output packet accounting Status of IP accounting for this interface and the threshold
(maximum number of entries).
TCP/IP header compression Status of compression.
Probe proxy name Status of whether the HP Probe proxy name replies are generated.
WCCP Redirect outbound is
enabled
Status of whether packets that are received on an interface are
redirected to a cache engine.
WCCP Redirect exclude is
disabled
Status of whether packets that are targeted for an interface are
excluded from being redirected to a cache engine.
Netflow Data Export (hardware)
is enabled
NDE hardware flow status on the interface.
Table 2-28 show ip interface Field Descriptions (continued)
Field Description