Cisco Catalyst 4500 Series - Page 829

2-771
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip verify source
Related Commands Command Description
ip dhcp snooping information option Enables DHCP option 82 data insertion.
ip dhcp snooping limit rate Configures the number of the DHCP messages that an
interface can receive per second.
ip dhcp snooping trust Enables DHCP snooping on a trusted VLAN.
ip igmp snooping Enables IGMP snooping.
ip igmp snooping vlan Enables IGMP snooping for a VLAN.
ip source binding Adds or deletes a static IP source binding entry.
ip verify source Enables IP source guard on untrusted Layer 2 interfaces.
show ip source binding Displays the DHCP snooping binding entries.