Cisco Catalyst 4500 Series - Page 831

2-773
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip wccp
Examples This section contains examples and field descriptions for the following forms of this command:
• show ip wccp service-number
• show ip wccp service-number view
• show ip wccp service-number detail
• show ip wccp interfaces
• show ip wccp web-cache
• show ip wccp web-cache detail
• show ip wccp
show ip wccp service-number
The following is sample output from the show ip wccp service-number command:
Switch# show ip wccp 90
Global WCCP information:
Router information:
Router Identifier: 100.1.1.16
Protocol Version: 2.0
Service Identifier: 90
Number of Service Group Clients: 1
Number of Service Group Routers: 1
Total Packets s/w Redirected: 0
Process: 0
CEF: 0
Redirect Access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group Access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Total Bypassed Packets Received: 0
Table 30 describes the significant fields shown in the display.
Table 30 show ip wccp service-number Field Descriptions
Field Description
Router information A list of routers detected by the current router.
Protocol Version The version of WCCP being used by the router in the service
group.
Service Identifier Indicates which service is detailed.
Number of Service Group Clients: The number of clients that are visible to the router and other
clients in the service group.
Number of Service Group Routers The number of routers in the service group.
Total Packets s/w Redirected Total number of packets s/w redirected by the router.
Redirect Access-list The name or number of the access list that determines which
packets will be redirected.
Total Packets Denied Redirect Total number of packets that were not redirected because they
did not match the access list.