Cisco Catalyst 4500 Series Command Reference Guide

2-786
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ipv6 mld snooping querier
Related Commands Command Description
ipv6 mld snooping Enables IP version 6 (IPv6) Multicast Listener Discovery
(MLD) snooping globally or on the specified VLAN.
ipv6 mld snooping
last-listener-query-count
Configures IP version 6 (IPv6) Multicast Listener
Discovery Mulitcast Address Specific Queries (MASQs)
that will be sent before aging out a client.
ipv6 mld snooping
last-listener-query-interval
Configures IP version 6 (IPv6) MLD snooping last-listener
query interval on the switch or on a VLAN.
ipv6 mld snooping robustness-variable Configures the number of IP version 6 (IPv6) MLD queries
that the switch sends before deleting a listener that does not
respond.
ipv6 mld snooping tcn Configures IP version 6 (IPv6) MLD Topology Change
Notifications (TCNs).

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E