Cisco Catalyst 4500 Series Command Reference Guide

2-862
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show monitor capture file
36 35.000000 10.1.1.175 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
37 36.000000 10.1.1.176 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
38 37.000000 10.1.1.177 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
39 38.000000 10.1.1.178 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
40 39.000000 10.1.1.179 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
41 40.000000 10.1.1.180 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
42 41.000000 10.1.1.181 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
43 42.000000 10.1.1.182 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
44 43.000000 10.1.1.183 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
45 44.000000 10.1.1.184 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
46 45.000000 10.1.1.185 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
47 46.000000 10.1.1.186 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
48 47.000000 10.1.1.187 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
49 48.000000 10.1.1.188 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
50 49.000000 10.1.1.189 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
51 50.000000 10.1.1.190 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
52 51.000000 10.1.1.191 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
53 52.000000 10.1.1.192 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
54 53.000000 10.1.1.193 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
55 54.000000 10.1.1.194 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
56 55.000000 10.1.1.195 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
57 56.000000 10.1.1.196 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
58 57.000000 10.1.1.197 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
59 58.000000 10.1.1.198 -> 20.1.1.2 UDP Source port: 20001 Destination port:
20002
This example shows how to display a detailed output from a .pcap file:
Switch# show monitor capture file bootflash:mycap.pcap detailed
Frame 1: 256 bytes on wire (2048 bits), 256 bytes captured (2048 bits)
Arrival Time: Mar 21, 2012 14:35:09.111993000 PDT
Epoch Time: 1332365709.111993000 seconds
[Time delta from previous captured frame: 0.000000000 seconds]
[Time delta from previous displayed frame: 0.000000000 seconds]
[Time since reference or first frame: 0.000000000 seconds]
Frame Number: 1
Frame Length: 256 bytes (2048 bits)
Capture Length: 256 bytes (2048 bits)
[Frame is marked: False]
[Frame is ignored: False]

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E