2-879
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.4.0SG and IOS 15.1(2)SG)
OL-27596 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show policy-map control-plane
Related Commands
Table 2-39 show policy-map control-plane Field Descriptions
Field Description
Fields Associated with Classes or Service Policies
Service-policy input Name of the input service policy that is applied to the control
plane. (If configured, this field will also show the output
service policy.)
Class-map Class of traffic being displayed. Traffic is displayed for each
configured class. The choice for implementing class matches
(for example, match-all or match-any) can also appear next to
the traffic class.
Match Match criteria for the specified class of traffic.
Note For more information about the variety of match
criteria options available, refer to the chapter
“Configuring the Modular Quality of Service
Command-Line Interface” in the Cisco IOS Quality
of Service Solutions Configuration Guide.
Fields Associated with Traffic Policing
police police command has been configured to enable traffic
policing.
conformed Action to be taken on packets conforming to a specified rate;
displays the number of packets and bytes on which the action
was taken.
exceeded Action to be taken on packets exceeding a specified rate;
displays the number of packets and bytes on which the action
was taken.
Command Description
control-plane Enters control-plane configuration mode.
service-policy input (control-plane) Attaches a policy map to a control plane for aggregate
control plane services.
To Next Page
Loading...
