EZ-USB FX3 Technical Reference Manual, Document Number: 001-76074 Rev. *F 392
DEV_CS
0xE0031400
10.11.1 DEV_CS (continued)
22:16 DEVICEADDR[6:0] During the USB enumeration process, the host sends a device a unique 7-bit address, which the USB
core copies into this register. The USB Core will automatically respond only to its assigned address.
During the USB RESET, this register will be cleared to zero.
15:8 COUNT[7:0] Number of errors detected
To clear the error count write 0 to these bits.
7:0 ERR_LIMIT[7:0] Error interrupt limit (COUNT ERR_LIMIT will cause UIB_ERR_INTR.ERRLIMIT interrupt)