Cypress EZ-USB FX3 - Gctl_Sw_Int

EZ-USB FX3 Technical Reference Manual, Document Number: 001-76074 Rev. *F 257
GCTL_SW_INT
0xE005104C
10.4.10 GCTL_SW_INT
Software Interrupt Register
This register is a software interrupt register with 31b argument.
31 SWINT Software interrupt request. Must be set by issuer and cleared by ISR.
30:0 ARGUMENT[30:0] 31-bit argument that can be set by issuer, read by ISR.
GCTL_SW_INT Software Interrupt Register 0xE005104C
b31 b30 b29 b28 b27 b26 b25 b24
SWINT ARGUMENT[30:24]
R/W R/W R/W R/W R/W R/W R/W R/W
R R R R R R R R
0 0 0 0 0 0 0 0
GCTL_SW_INT Software Interrupt Register
b23 b22 b21 b20 b19 b18 b17 b16
ARGUMENT[23:16]
R/W R/W R/W R/W R/W R/W R/W R/W
R R R R R R R R
0 0 0 0 0 0 0 0
GCTL_SW_INT Software Interrupt Register
b15 b14 b13 b12 b11 b10 b9 b8
ARGUMENT[15:8]
R/W R/W R/W R/W R/W R/W R/W R/W
R R R R R R R R
0 0 0 0 0 0 0 0
GCTL_SW_INT Software Interrupt Register
b7 b6 b5 b4 b3 b2 b1 b0
ARGUMENT[7:0]
R/W R/W R/W R/W R/W R/W R/W R/W
R R R R R R R R
0 0 0 0 0 0 0 0
Bit Name Description