Cypress EZ-USB FX3 - Page 654

EZ-USB FX3 Technical Reference Manual, Document Number: 001-76074 Rev. *F 654
SDMMC_INTR_MASK
0xFC
10.26.22 SDMMC_INTR_MASK (continued)
13 CMD_COMP 1: Enable interrupt due to CE-ATA command completion.
0: Disable interrupt due to CE-ATA command completion.
12 FIFO_U_DET 1: Enable interrupt due to FIFO underflow.
0: Disable interrupt due to FIFO underflow.
11 FIFO_O_DET 1: Enable interrupt due to FIFO overflow.
0: Disable interrupt due to FIFO overflow.
10 DAT3_CHANGE 1: Enable interrupt due to DAT3 state change.
0: Disable interrupt due to DAT3 state change.
9 CARD_DETECT 1: Enable interrupt due to S0S1_INS change.
0: Disable interrupt due to S0S1_INS change.
8SDIO_INTR 1: Enable interrupt due to SDIO interrupt.
0: Disable interrupt due to SDIO interrupt.
7 CRC16_ERROR 1: Enable interrupt due to data CRC error.
0: Disable interrupt due to data CRC error.
6 RD_DATA_TIMEOUT 1: Enable interrupt due to read timeout.
0: Disable interrupt due to read timeout.
5 BLOCKS_RECEIVED 1: Enable interrupt due to read completion.
0: Disable interrupt due to read completion.
4BLOCK_COMP 1: Enable interrupt due to write completion.
0: Disable interrupt due to write completion.
3 CRC7_ERROR 1: Enable interrupt due to response CRC error.
0: Disable interrupt due to response CRC error.
2 RESPTIMEOUT 1: Enable interrupt due to response timeout.
0: Disable interrupt due to response timeout.
1 RCVDRES 1: Enable interrupt due to response reception.
0: Disable interrupt due to response reception.
0 CMDSENT 1: Enable interrupt due to command transmission.
0: Disable interrupt due to command transmission.