DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
152
Figure 5-45 VLAN Mapping Profile Window
The fields that can be configured are described below:
Parameter Description
Profile ID
Enter the ID of the VLAN mapping profile here. A lower ID has a higher priority.
The ID range is from 1 to 1000.
Type
Select the profile type here. Different profiles can match different fields. Options to
choose from are Ethernet, IP, IPv6, and Ethernet-IP.
• Ethernet - The profile can match Layer 2 fields.
• IP - The profile can match Layer 3 IP fields.
• IPv6 - The profile can match IPv6 destination or source addresses.
• Ethernet-IP - The profile can match Layer 2 and Layer 3 IP fields.
Click the Add Profile button to add a new VLAN mapping profile.
Click the Find button to locate a specific entry based on the information entered.
Click the Add Rule button to create a new rule.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Add Rule button next to an Ethernet type profile, the following page will appear.
To Next Page
Loading...
