DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
265
Figure 6-72 OSPFv2 LSDB Table (Show Detail) Window
Click the Back button to return to the previous window.
OSPFv2 Neighbor Table
This window is used to display information on OSPF neighbors.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Neighbor Table, as shown below:
Figure 6-73 OSPFv2 Neighbor Table Window
The fields that can be configured are described below:
Parameter Description
VRF Name
Enter the name of the VRF instance here. This name can be up to 12 characters
long. Click the Select VRF button to select a pre-configured VRF instance that will
be used here.
Interface Name
Enter the name of the interface that will be used in the results here.
Neighbor
Enter the neighbor ID here.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view more detailed information for the specified entry.
To Next Page
Loading...
