DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
387
Parameter Description
IPv6 Next Hop ACL
Select and enter the standard IPv6 access list name here. This option is used to
define a clause to match the route’s next hop based on the standard IPv6 access
list. This string can be up to 32 characters long.
AS Path
Select and enter the standard or extended IP/IPv6 access list name here. This
option is used to define a clause to match the route’s AS path based on the
standard or extended IP/IPv6 access list. This string can be up to 32 characters
long.
Community
Select and enter the standard or extended IP/IPv6 access list name here. This
option is used to define a clause to match the route’s community based on the
standard or extended IP/IPv6 access list. This string can be up to 32 characters
long.
Extcommunity
Select and enter the standard or extended IP/IPv6 access list name here. This
option is used to define a clause to match the route’s extended community based
on the standard or extended IP/IPv6 access list. This string can be up to 32
characters long.
Route Source
Select and enter the standard or extended IP/IPv6 access list name here. This
option is used to define a clause to match the route’s source based on the
standard or extended IP/IPv6 access list. This string can be up to 32 characters
long.
Metric
Select and enter the metric value of the route here. The range is from 0 to
4294967294. This option is used to define a clause to match the route metric.
Route Type
Select the route type here. Options to choose from are Internal, External,
External Type-1, and External Type-2.
• Internal - Specifies the intra-area and inter-area routes of Open Shortest
Path First (OSPF).
• External - Specifies the autonomous system’s external route of OSPF. If the
type-1 and type-2 options are not specified, type-1 and type-2 external routes
are included.
• External Type-1 - Specifies the type-1 external route of OSPF.
• External Type-2 - Specifies the type-2 external route of OSPF.
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
After clicking the Edit button in the Set Clauses column, the following page will appear.
To Next Page
Loading...
