D-Link DGS-3630 SERIES - Page 646

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
634
Log Description Severity
mepid: Represents the MEPID of the MEP.
macaddr: Represents the MAC address of the MEP.
Event description: Remote MEP's MAC reports an error status
Log Message: CFM remote MAC error. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the MEP direction, which can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
macaddr: Represents the MAC address of the MEP.
Warning
Event description: Remote MEP detects CFM defects
Log Message: CFM remote detects a defect. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the MEP direction, which can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
macaddr: Represents the MAC address of the MEP.
Informational
CFM Extension
Log Description Severity
Event description: AIS condition detected
Log Message: AIS condition detected. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the direction of the MEP. This can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Event description: AIS condition cleared
Log Message: AIS condition cleared. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the direction of the MEP. This can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Event description: LCK condition detected
Log Message: LCK condition detected. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
Notice