DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
635
Log Description Severity
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the direction of the MEP. This can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
Event description: LCK condition cleared
Log Message: LCK condition cleared. MD Level:<mdlevel>, VLAN:<vlanid>,
Local(Interface:<interface-id>, Direction:<mepdirection>, MEPID:<mepid>)
Parameters description:
vlanid: Represents the VLAN identifier of the MEP.
mdlevel: Represents the MD level of the MEP.
interface-id: Represents the interface number of the MEP.
mepdirection: Represents the direction of the MEP. This can be "inward" or "outward".
mepid: Represents the MEPID of the MEP.
Notice
Configuration/Firmware
Log Description Severity
Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>, ]Firmware upgraded by <session> successfully (Username:
<username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name:
<pathFile>)
Parameters description:
unitID: The unit ID.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
serverIP: Server IP address.
pathFile: Path and file name on server.
Informational
Event description: Firmware upgraded unsuccessfully.
Log Message: [Unit <unitID>, ]Firmware upgraded by <session> unsuccessfully
(Username: <username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File
Name: <pathFile>)
Parameters description:
unitID: The unit ID.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
serverIP: Server IP address.
pathFile: Path and file name on server.
Warning
Event description: Firmware uploaded successfully.
Log Message: [Unit <unitID>, ]Firmware uploaded by <session> successfully (Username:
<username>[, IP: <ipaddr>, MAC: <macaddr>], Server IP: <serverIP>, File Name:
<pathFile>)
Parameters description:
unitID: The unit ID.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
Informational
To Next Page
Loading...
