GBC AdvancedPunch Pro - Every Call Activities; Preventative Maintenance; Scheduled Maintenance

Service Call Procedures 08/20/2015 GBC AdvancedPunch Pro
1-4
EVERY CALL ACTIVITIES
Purpose
List service activities required on every service call.
PROCEDURE
1. Perform GP 6.5 Operational Inspection.
2. Perform GP 6.6 Internal Inspection.
3. Perform GP 6.8 External Cleaning.
4. Perform GP 6.9 Internal Cleaning
5. Perform GP 6.10 Base Cleaning
6. Perform GP 6.11 Chip Bin Cleaning
7. Perform GP 6.12 Die Guide Cleaning
8. Perform GP 6.17 Optical Sensor Cleaning
SCHEDULED MAINTENANCE
Purpose
Check the supply of customer consumables (See Section 5 for customer
consumable part numbers).
PROCEDURE
1. Do GP 6.1.10 DIE CYCLES Procedure to check the cycle life on the
Die Set installed in the Advance Punch Pro.
2. See the AdvancedPunch Pro Maintenance Schedule on page 1-5.
PREVENTATIVE MAINTENANCE
Purpose
If operating properly, the Advanced Punch Pro will punch the same types
of copy paper and cover materials handled by the printer and run at the
same speed.
Hole quality will vary between different grades of paper.
See the AdvancedPunch Pro Maintenance Schedule on page 1-5.